| GENERAL OPTIONS | |
|---|---|
| Command line option | Description |
| -p, --port n | The server port for the server to listen on and the client to connect to. This should be the same in both client and server. Default is 5201. |
| --cport n | Option to specify the client-side port. (new in iPerf 3.1) |
| -f, --format [kmKM] | A letter specifying the format to print bandwidth numbers in.
Supported formats are
'k' = Kbits/sec 'K' = KBytes/sec 'm' = Mbits/sec 'M' = MBytes/secThe adaptive formats choose between kilo- and mega- as appropriate. |
| -i, --interval n | Sets the interval time in seconds between periodic bandwidth, jitter, and loss reports. If non-zero, a report is made every interval seconds of the bandwidth since the last report. If zero, no periodic reports are printed. Default is zero. |
| -F, --file name | client-side: read from the file and write to the network, instead of using random data; server-side: read from the network and write to the file, instead of throwing the data away. |
| -A, --affinity n/n,m-F | Set the CPU affinity, if possible (Linux and FreeBSD only). On both the client and server you can set the local affinity by using the n form of this argument (where n is a CPU number). In addition, on the client side you can override the server’s affinity for just that one test, using the n,m form of argument. Note that when using this feature, a process will only be bound to a single CPU (as opposed to a set containing potentialy multiple CPUs). |
| -B, --bind host | Bind to host, one of this machine's addresses. For the client this sets the outbound interface. For a server this sets the incoming interface. This is only useful on multihomed hosts, which have multiple network interfaces. |
| -V, --verbose | give more detailed output |
| -J, --json | output in JSON format |
| --logfile file | send output to a log file. (new in iPerf 3.1) |
| --d, --debug | emit debugging output. Primarily (perhaps exclusively) of use to developers. |
| -v, --version | Show version information and quit. |
| -h, --help | Show a help synopsis and quit. |
| SERVER SPECIFIC OPTIONS | |
| Command line option | Description |
| -s, --server | Run iPerf in server mode. (This will only allow one iperf connection at a time) |
| -D, --daemon | Run the server in background as a daemon. |
| -I, --pidfilefile | write a file with the process ID, most useful when running as a daemon. (new in iPerf 3.1) |
| CLIENT SPECIFIC OPTIONS | |
| Command line option | Description |
| -c, --client host | Run iPerf in client mode, connecting to an iPerf server running on host. |
| --sctp | Use SCTP rather than TCP (Linux, FreeBSD and Solaris). (new in iPerf 3.1) |
| -u, --udp | Use UDP rather than TCP. See also the -b option. |
| -b, --bandwidth n[KM] | Set target bandwidth to n bits/sec (default 1 Mbit/sec for UDP, unlimited for TCP). If there are multiple streams (-P flag), the bandwidth limit is applied separately to each stream. You can also add a ’/’ and a number to the bandwidth specifier. This is called "burst mode". It will send the given number of packets without pausing, even if that temporarily exceeds the specified bandwidth limit. |
| -t, --time n | The time in seconds to transmit for. iPerf normally works by repeatedly sending an array of len bytes for time seconds. Default is 10 seconds. See also the -l, -k and -n options. |
| -n, --num n[KM] | The number of buffers to transmit. Normally, iPerf sends for 10 seconds. The -n option overrides this and sends an array of len bytes num times, no matter how long that takes. See also the -l, -k and -t options. |
| -k, --blockcount n[KM] | The number of blocks (packets) to transmit. (instead of -t or -n) See also the -t, -l and -n options. |
| -l, --length n[KM] | The length of buffers to read or write. iPerf works by writing an array of len bytes a number of times. Default is 128 KB for TCP, 8 KB for UDP. See also the -n, -k and -t options. |
| -P, --parallel n | The number of simultaneous connections to make to the server. Default is 1. |
| -R, --reverse | Run in reverse mode (server sends, client receives). |
| -w, --window n[KM] | Sets the socket buffer sizes to the specified value. For TCP, this sets the TCP window size. (this gets sent to the server and used on that side too) |
| -M, --set-mss n | Attempt to set the TCP maximum segment size (MSS). The MSS is usually the MTU - 40 bytes for the TCP/IP header. For ethernet, the MSS is 1460 bytes (1500 byte MTU). |
| -N, --no-delay | Set the TCP no delay option, disabling Nagle's algorithm. Normally this is only disabled for interactive applications like telnet. |
| -4, --version4 | only use IPv4. |
| -6, --version4 | only use IPv6. |
| -S, --tos n | The type-of-service for outgoing packets. (Many routers ignore the TOS
field.) You may specify the value in hex with a '0x' prefix, in octal with
a '0' prefix, or in decimal. For example, '0x10' hex = '020' octal = '16'
decimal. The TOS numbers specified in RFC 1349 are:
IPTOS_LOWDELAY minimize delay 0x10 IPTOS_THROUGHPUT maximize throughput 0x08 IPTOS_RELIABILITY maximize reliability 0x04 IPTOS_LOWCOST minimize cost 0x02 |
| -L, --flowlabel n | Set the IPv6 flow label (currently only supported on Linux). |
| -Z, --zerocopy | Use a "zero copy" method of sending data, such as sendfile(2), instead of the usual write(2). This uses much less CPU. |
| -O, --omit n | Omit the first n seconds of the test, to skip past the TCP TCP slowstart period. |
| -T, --title str | Prefix every output line with this string. |
| -C, --linux-congestion algo | Set the congestion control algorithm (Linux only for iPerf 3.0, Linux and FreeBSD for iPerf 3.1). |
See also https://github.com/esnet/iperf
See also https://sourceforge.net/projects/iperf2/
| GENERAL OPTIONS | ||
|---|---|---|
| Command line option | Environment variable option | Description |
| -f, --format [bkmaBKMA] | $IPERF_FORMAT | A letter specifying the format to print bandwidth numbers in.
Supported formats are
'b' = bits/sec 'B' = Bytes/sec 'k' = Kbits/sec 'K' = KBytes/sec 'm' = Mbits/sec 'M' = MBytes/sec 'g' = Gbits/sec 'G' = GBytes/sec 'a' = adaptive bits/sec 'A' = adaptive Bytes/secThe adaptive formats choose between kilo- and mega- as appropriate. Fields other than bandwidth always print bytes, but otherwise follow the requested format. Default is 'a'. NOTE: here Kilo = 1024, Mega = 1024^2 and Giga = 1024^3 when dealing with bytes. Commonly in networking, Kilo = 1000, Mega = 1000^2, and Giga = 1000^3 so we use this when dealing with bits. If this really bothers you, use -f b and do the math. |
| -i, --interval # | $IPERF_INTERVAL | Sets the interval time in seconds between periodic bandwidth, jitter, and loss reports. If non-zero, a report is made every interval seconds of the bandwidth since the last report. If zero, no periodic reports are printed. Default is zero. |
| -l, --len #[KM] | $IPERF_LEN | The length of buffers to read or write. iPerf works by writing an array of len bytes a number of times. Default is 8 KB for TCP, 1470 bytes for UDP. Note for UDP, this is the datagram size and needs to be lowered when using IPv6 addressing to 1450 or less to avoid fragmentation. See also the -n and -t options. |
| -m, --print_mss | $IPERF_PRINT_MSS | Print the reported TCP MSS size (via the TCP_MAXSEG option) and the observed read sizes which often correlate with the MSS. The MSS is usually the MTU - 40 bytes for the TCP/IP header. Often a slightly smaller MSS is reported because of extra header space from IP options. The interface type corresponding to the MTU is also printed (ethernet, FDDI, etc.). This option is not implemented on many OSes, but the read sizes may still indicate the MSS. |
| -p, --port # | $IPERF_PORT | The server port for the server to listen on and the client to connect to. This should be the same in both client and server. Default is 5001, the same as ttcp. |
| -u, --udp | $IPERF_UDP | Use UDP rather than TCP. See also the -b option. |
| -w, --window #[KM] | $TCP_WINDOW_SIZE | Sets the socket buffer sizes to the specified value. For TCP, this sets the TCP window size. For UDP it is just the buffer which datagrams are received in, and so limits the largest receivable datagram size. |
| -B, --bind host | $IPERF_BIND | Bind to host, one of this machine's addresses. For the client
this sets the outbound interface. For a server this sets the incoming
interface. This is only useful on multihomed hosts, which have multiple
network interfaces.
For iPerf in UDP server mode, this is also used to bind and join to a multicast group. Use addresses in the range 224.0.0.0 to 239.255.255.255 for multicast. See also the -T option. |
| -C, --compatibility | $IPERF_COMPAT | Compatibility mode allows for use with older version of iPerf. This mode is not required for interoperability but it is highly recommended. In some cases when using representative streaming you could cause a 1.7 server to crash or cause undesired connection attempts. |
| -M, --mss #[KM} | $IPERF_MSS | Attempt to set the TCP maximum segment size (MSS) via the TCP_MAXSEG option. The MSS is usually the MTU - 40 bytes for the TCP/IP header. For ethernet, the MSS is 1460 bytes (1500 byte MTU). This option is not implemented on many OSes. |
| -N, --nodelay | $IPERF_NODELAY | Set the TCP no delay option, disabling Nagle's algorithm. Normally this is only disabled for interactive applications like telnet. |
| -V (from v1.6 or higher) | . | Bind to an IPv6 address Server side: $ iperf -s -V Client side: |
| -h, --help | Print out a summary of commands and quit. | |
| -v, --version | Print version information and quit. Prints 'pthreads' if compiled with POSIX threads, 'win32 threads' if compiled with Microsoft Win32 threads, or 'single threaded' if compiled without threads. | |
| SERVER SPECIFIC OPTIONS | ||
| Command line option | Environment variable option | Description |
| -s, --server | $IPERF_SERVER | Run iPerf in server mode. (iPerf2 can handle multiple client requests) |
| -D (from v1.2 or higher) | . | Run the server as a daemon (Unix platforms) On Win32 platforms where services are available, iPerf will start running as a service. |
| -R (only for Windows, from v1.2 or higher) | . | Remove the iPerf service (if it's running). |
| -o (only for Windows, from v1.2 or higher) | . | Redirect output to given file. |
| -c, --client host | $IPERF_CLIENT | If iPerf is in server mode, then specifying a host with -c will limit the connections that iPerf will accept to the host specified. Does not work well for UDP. |
| -P, --parallel # | $IPERF_PARALLEL | The number of connections to handle by the server before closing. Default is 0 (which means to accept connections forever). |
| CLIENT SPECIFIC OPTIONS | ||
| Command line option | Environment variable option | Description |
| -b, --bandwidth #[KM] | $IPERF_BANDWIDTH | The UDP bandwidth to send at, in bits/sec. This implies the -u option. Default is 1 Mbit/sec. |
| -c, --client host | $IPERF_CLIENT | Run iPerf in client mode, connecting to an iPerf server running on host. |
| -d, --dualtest | $IPERF_DUALTEST | Run iPerf in dual testing mode. This will cause the server to connect back to the client on the port specified in the -L option (or defaults to the port the client connected to the server on). This is done immediately therefore running the tests simultaneously. If you want an alternating test try -r. |
| -n, --num #[KM] | $IPERF_NUM | The number of buffers to transmit. Normally, iPerf sends for 10 seconds. The -n option overrides this and sends an array of len bytes num times, no matter how long that takes. See also the -l and -t options. |
| -r, --tradeoff | $IPERF_TRADEOFF | Run iPerf in tradeoff testing mode. This will cause the server to connect back to the client on the port specified in the -L option (or defaults to the port the client connected to the server on). This is done following the client connection termination, therefore running the tests alternating. If you want an simultaneous test try -d. |
| -t, --time # | $IPERF_TIME | The time in seconds to transmit for. iPerf normally works by repeatedly sending an array of len bytes for time seconds. Default is 10 seconds. See also the -l and -n options. |
| -L, --listenport # | $IPERF_LISTENPORT | This specifies the port that the server will connect back to the client on. It defaults to the port used to connect to the server from the client. |
| -P, --parallel # | $IPERF_PARALLEL | The number of simultaneous connections to make to the server. Default is 1. Requires thread support on both the client and server. |
| -S, --tos # | $IPERF_TOS | The type-of-service for outgoing packets. (Many routers ignore the TOS
field.) You may specify the value in hex with a '0x' prefix, in octal with
a '0' prefix, or in decimal. For example, '0x10' hex = '020' octal = '16'
decimal. The TOS numbers specified in RFC 1349 are:
IPTOS_LOWDELAY minimize delay 0x10 IPTOS_THROUGHPUT maximize throughput 0x08 IPTOS_RELIABILITY maximize reliability 0x04 IPTOS_LOWCOST minimize cost 0x02 |
| -T, --ttl # | $IPERF_TTL | The time-to-live for outgoing multicast packets. This is essentially the number of router hops to go through, and is also used for scoping. Default is 1, link-local. |
| -F (from v1.2 or higher) | . | Use a representative stream to measure bandwidth, e.g. :- $ iperf -c <server address> -F <file-name> |
| -I (from v1.2 or higher) | . | Same as -F, input from stdin. |
bottleneck bandwidth * round trip timeIn the below modi4/cyclops example, the bottleneck link is a 45 Mbit/sec DS3 link and the round trip time measured with ping is 42 ms. The bandwidth delay product is
45 Mbit/sec * 42 msThat is a starting point for figuring the best window size; setting it higher or lower may produce better results. In our example, buffer sizes over 130K did not improve the performance, despite the bandwidth delay product of 230K.
= (45e6) * (42e-3)
= 1890000 bits
= 230 KByte
Note that many OSes and hosts have upper limits on the TCP window size. These may be as low as 64 KB, or as high as several MB. iPerf tries to detect when these occur and give a warning that the actual and requested window sizes are not equal (as below, though that is due to rounding in IRIX). For more information on TCP window sizes, see the LaFibre.info. Here is an example session, between node1 in Illinois and node2 in North Carolina. These are connected via the vBNS backbone and a 45 Mbit/sec DS3 link. Notice we improve bandwidth performance by a factor of 3 using proper TCP window sizes. Use the adaptive window sizes feature on platforms which allow setting window sizes in the granularity of bytes.
Another test to do is run parallel TCP streams. If the total aggregate bandwidth is more than what an individual stream gets, something is wrong. Either the TCP window size is too small, or the OS's TCP implementation has bugs, or the network itself has deficiencies. See above for TCP window sizes; otherwise diagnosing which is somewhat difficult. If iPerf is compiled with pthreads, a single client and server can test this, otherwise setup multiple clients and servers on different ports. Here's an example where a single stream gets 16.5 Mbit/sec, but two parallel streams together get 16.7 + 9.4 = 26.1 Mbit/sec, even when using large TCP window sizes:node2> iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 60.0 KByte (default) ------------------------------------------------------------ [ 4] local <IP Addr node2> port 5001 connected with <IP Addr node1> port 2357 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.1 sec 6.5 MBytes 5.2 Mbits/sec node1> iperf -c node2 ------------------------------------------------------------ Client connecting to node1, TCP port 5001 TCP window size: 59.9 KByte (default) ------------------------------------------------------------ [ 3] local <IP Addr node1> port 2357 connected with <IP Addr node2> port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 6.5 MBytes 5.2 Mbits/sec
node2> iperf -s -w 130k ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 130 KByte ------------------------------------------------------------ [ 4] local <IP Addr node 2> port 5001 connected with <IP Addr node 1> port 2530 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.1 sec 19.7 MBytes 15.7 Mbits/sec node1> iperf -c node2 -w 130k ------------------------------------------------------------ Client connecting to node2, TCP port 5001 TCP window size: 129 KByte (WARNING: requested 130 KByte) ------------------------------------------------------------ [ 3] local <IP Addr node1> port 2530 connected with <IP Addr node2> port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 19.7 MBytes 15.8 Mbits/sec
A secondary tuning issue for TCP is the maximum transmission unit (MTU). To be most effective, both hosts should support Path MTU Discovery. Hosts without Path MTU Discovery often use 536 as the MSS, which wastes bandwidth and processing time. Use the -m option to display what MSS is being used, and see if this matches what you expect. Often it is around 1460 bytes for ethernet.node2> iperf -s -w 300k ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 300 KByte ------------------------------------------------------------ [ 4] local <IP Addr node2> port 5001 connected with <IP Addr node1> port 6902 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.2 sec 20.9 MBytes 16.5 Mbits/sec [ 4] local <IP Addr node2> port 5001 connected with <IP Addr node1> port 6911 [ 5] local <IP Addr node2> port 5001 connected with <IP Addr node2> port 6912 [ ID] Interval Transfer Bandwidth [ 5] 0.0-10.1 sec 21.0 MBytes 16.7 Mbits/sec [ 4] 0.0-10.3 sec 12.0 MBytes 9.4 Mbits/sec node1> ./iperf -c node2 -w 300k ------------------------------------------------------------ Client connecting to node2, TCP port 5001 TCP window size: 299 KByte (WARNING: requested 300 KByte) ------------------------------------------------------------ [ 3] local <IP Addr node2> port 6902 connected with <IP Addr node1> port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.2 sec 20.9 MBytes 16.4 Mbits/sec node1> iperf -c node2 -w 300k -P 2 ------------------------------------------------------------ Client connecting to node2, TCP port 5001 TCP window size: 299 KByte (WARNING: requested 300 KByte) ------------------------------------------------------------ [ 4] local <IP Addr node2> port 6912 connected with <IP Addr node1> port 5001 [ 3] local <IP Addr node2> port 6911 connected with <IP Addr node1> port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.1 sec 21.0 MBytes 16.6 Mbits/sec [ 3] 0.0-10.2 sec 12.0 MBytes 9.4 Mbits/sec
node3> iperf -s -m
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 60.0 KByte (default)
------------------------------------------------------------
[ 4] local <IP Addr node3> port 5001 connected with <IP Addr node4> port 1096
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 2.0 sec 1.8 MBytes 6.9 Mbits/sec
[ 4] MSS size 1448 bytes (MTU 1500 bytes, ethernet)
[ 4] Read lengths occurring in more than 5% of reads:
[ 4] 952 bytes read 219 times (16.2%)
[ 4] 1448 bytes read 1128 times (83.6%)
iPerf supports other tuning options, which were added for exceptional network situations like HIPPI-to-HIPPI over ATM.node4> iperf -s -m ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 32.0 KByte (default) ------------------------------------------------------------ [ 4] local <IP Addr node4> port 5001 connected with <IP Addr node3> port 13914 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 2.3 sec 632 KBytes 2.1 Mbits/sec WARNING: Path MTU Discovery may not be enabled. [ 4] MSS size 536 bytes (MTU 576 bytes, minimum) [ 4] Read lengths occurring in more than 5% of reads: [ 4] 536 bytes read 308 times (58.4%) [ 4] 1072 bytes read 91 times (17.3%) [ 4] 1608 bytes read 29 times (5.5%)
iPerf creates a constant bit rate UDP stream. This is a very artificial stream, similar to voice communication but not much else.
You will want to adjust the datagram size (-l) to the size your application uses.
The server detects UDP datagram loss by ID numbers in the datagrams. Usually a UDP datagram becomes several IP packets. Losing a single IP packet will lose the entire datagram. To measure packet loss instead of datagram loss, make the datagrams small enough to fit into a single packet, using the -l option. The default size of 1470 bytes works for ethernet. Out-of-order packets are also detected. (Out-of-order packets cause some ambiguity in the lost packet count; iPerf assumes they are not duplicate packets, so they are excluded from the lost packet count.) Since TCP does not report loss to the user, I find UDP tests helpful to see packet loss along a path.
Jitter calculations are continuously computed by the server, as specified by RTP in RFC 1889. The client records a 64 bit second/microsecond timestamp in the packet. The server computes the relative transit time as (server's receive time - client's send time). The client's and server's clocks do not need to be synchronized; any difference is subtracted out in the jitter calculation. Jitter is the smoothed mean of differences between consecutive transit times.Notice the higher jitter due to datagram reassembly when using larger 32 KB datagrams, each split into 23 packets of 1500 bytes. The higher datagram loss seen here may be due to the burstiness of the traffic, which is 23 back-to-back packets and then a long pause, rather than evenly spaced individual packets.node2> iperf -s -u -i 1 ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 60.0 KByte (default) ------------------------------------------------------------ [ 4] local <IP Addr node2> port 5001 connected with <IP Addr node1> port 9726 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.0- 1.0 sec 1.3 MBytes 10.0 Mbits/sec 0.209 ms 1/ 894 (0.11%) [ 4] 1.0- 2.0 sec 1.3 MBytes 10.0 Mbits/sec 0.221 ms 0/ 892 (0%) [ 4] 2.0- 3.0 sec 1.3 MBytes 10.0 Mbits/sec 0.277 ms 0/ 892 (0%) [ 4] 3.0- 4.0 sec 1.3 MBytes 10.0 Mbits/sec 0.359 ms 0/ 893 (0%) [ 4] 4.0- 5.0 sec 1.3 MBytes 10.0 Mbits/sec 0.251 ms 0/ 892 (0%) [ 4] 5.0- 6.0 sec 1.3 MBytes 10.0 Mbits/sec 0.215 ms 0/ 892 (0%) [ 4] 6.0- 7.0 sec 1.3 MBytes 10.0 Mbits/sec 0.325 ms 0/ 892 (0%) [ 4] 7.0- 8.0 sec 1.3 MBytes 10.0 Mbits/sec 0.254 ms 0/ 892 (0%) [ 4] 8.0- 9.0 sec 1.3 MBytes 10.0 Mbits/sec 0.282 ms 0/ 892 (0%) [ 4] 0.0-10.0 sec 12.5 MBytes 10.0 Mbits/sec 0.243 ms 1/ 8922 (0.011%) node1> iperf -c node2 -u -b 10m ------------------------------------------------------------ Client connecting to node2, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 60.0 KByte (default) ------------------------------------------------------------ [ 3] local <IP Addr node1> port 9726 connected with <IP Addr node2> port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 12.5 MBytes 10.0 Mbits/sec [ 3] Sent 8922 datagrams
node2> iperf -s -u -l 32k -w 128k -i 1 ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 32768 byte datagrams UDP buffer size: 128 KByte ------------------------------------------------------------ [ 3] local <IP Addr node2> port 5001 connected with <IP Addr node1> port 11303 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 3] 0.0- 1.0 sec 1.3 MBytes 10.0 Mbits/sec 0.430 ms 0/ 41 (0%) [ 3] 1.0- 2.0 sec 1.1 MBytes 8.5 Mbits/sec 5.996 ms 6/ 40 (15%) [ 3] 2.0- 3.0 sec 1.2 MBytes 9.7 Mbits/sec 0.796 ms 1/ 40 (2.5%) [ 3] 3.0- 4.0 sec 1.2 MBytes 10.0 Mbits/sec 0.403 ms 0/ 40 (0%) [ 3] 4.0- 5.0 sec 1.2 MBytes 10.0 Mbits/sec 0.448 ms 0/ 40 (0%) [ 3] 5.0- 6.0 sec 1.2 MBytes 10.0 Mbits/sec 0.464 ms 0/ 40 (0%) [ 3] 6.0- 7.0 sec 1.2 MBytes 10.0 Mbits/sec 0.442 ms 0/ 40 (0%) [ 3] 7.0- 8.0 sec 1.2 MBytes 10.0 Mbits/sec 0.342 ms 0/ 40 (0%) [ 3] 8.0- 9.0 sec 1.2 MBytes 10.0 Mbits/sec 0.431 ms 0/ 40 (0%) [ 3] 9.0-10.0 sec 1.2 MBytes 10.0 Mbits/sec 0.407 ms 0/ 40 (0%) [ 3] 0.0-10.0 sec 12.3 MBytes 9.8 Mbits/sec 0.407 ms 7/ 401 (1.7%) node1> iperf -c node2 -b 10m -l 32k -w 128k ------------------------------------------------------------ Client connecting to node2, UDP port 5001 Sending 32768 byte datagrams UDP buffer size: 128 KByte ------------------------------------------------------------ [ 3] local <IP Addr node2> port 11303 connected with <IP Addr node1> port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 12.5 MBytes 10.0 Mbits/sec [ 3] Sent 401 datagrams
To test multicast, run several servers with the bind option (-B, --bind) set to the multicast group address. Run the client, connecting to the multicast group address and setting the TTL (-T, --ttl) as needed. Unlike normal TCP and UDP tests, multicast servers may be started after the client. In that case, datagrams sent before the server started show up as losses in the first periodic report (61 datagrams on arno below).
node5> iperf -c 224.0.67.67 -u --ttl 5 -t 5 ------------------------------------------------------------ Client connecting to 224.0.67.67, UDP port 5001 Sending 1470 byte datagrams Setting multicast TTL to 5 UDP buffer size: 32.0 KByte (default) ------------------------------------------------------------ [ 3] local <IP Addr node5> port 1025 connected with 224.0.67.67 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 642 KBytes 1.0 Mbits/sec [ 3] Sent 447 datagrams node5> iperf -s -u -B 224.0.67.67 -i 1 ------------------------------------------------------------ Server listening on UDP port 5001 Binding to local address 224.0.67.67 Joining multicast group 224.0.67.67 Receiving 1470 byte datagrams UDP buffer size: 32.0 KByte (default) ------------------------------------------------------------ [ 3] local 224.0.67.67 port 5001 connected with <IP Addr node5> port 1025 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 3] 0.0- 1.0 sec 131 KBytes 1.0 Mbits/sec 0.007 ms 0/ 91 (0%) [ 3] 1.0- 2.0 sec 128 KBytes 1.0 Mbits/sec 0.008 ms 0/ 89 (0%) [ 3] 2.0- 3.0 sec 128 KBytes 1.0 Mbits/sec 0.010 ms 0/ 89 (0%) [ 3] 3.0- 4.0 sec 128 KBytes 1.0 Mbits/sec 0.013 ms 0/ 89 (0%) [ 3] 4.0- 5.0 sec 128 KBytes 1.0 Mbits/sec 0.008 ms 0/ 89 (0%) [ 3] 0.0- 5.0 sec 642 KBytes 1.0 Mbits/sec 0.008 ms 0/ 447 (0%) node6> iperf -s -u -B 224.0.67.67 -i 1 ------------------------------------------------------------ Server listening on UDP port 5001 Binding to local address 224.0.67.67 Joining multicast group 224.0.67.67 Receiving 1470 byte datagrams UDP buffer size: 60.0 KByte (default) ------------------------------------------------------------ [ 3] local 224.0.67.67 port 5001 connected with <IP Addr node5> port 1025 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 3] 0.0- 1.0 sec 129 KBytes 1.0 Mbits/sec 0.778 ms 61/ 151 (40%) [ 3] 1.0- 2.0 sec 128 KBytes 1.0 Mbits/sec 0.236 ms 0/ 89 (0%) [ 3] 2.0- 3.0 sec 128 KBytes 1.0 Mbits/sec 0.264 ms 0/ 89 (0%) [ 3] 3.0- 4.0 sec 128 KBytes 1.0 Mbits/sec 0.248 ms 0/ 89 (0%) [ 3] 0.0- 4.3 sec 554 KBytes 1.0 Mbits/sec 0.298 ms 61/ 447 (14%)
Start multiple clients or servers as explained above, sending data to the same multicast server. (If you have multiple servers listening on the multicast address, each of the servers will be getting the data)
Server side:
$ iperf -s -V
Client side:
$ iperf -c <Server IPv6 Address> -V>
Note: iPerf version 1.6.2 and eariler require a IPv6 address to be explicitly bound with the -B option for the server.
The -F option is for file input.
The -I option is for input from stdin.
E.g.
Client: $ iperf -c <server address> -F <file-name>
Client: $ iperf -c <server address> -I
Examples:
Note: If you stop want to restart the iPerf service after having killed it with the Microsoft Management Console or the Windows Task Manager, make sure to use the proper OPTION in the service properties dialog.
Client changes the TCP window size using a binary exponential algorithm. This means that you may notice that TCP window size suggested may vary according to the traffic in the network, iPerf will suggest the best window size for the current network scenario.
Once you have the distribution, on UNIX, unpack it using gzip and tar. That will create a new directory 'iperf-<version#>' with the source files and documentation.
iPerf compiles cleanly on many systems including Linux, SGI IRIX, HP-UX, Solaris, AIX, and Cray UNICOS. Use 'make' to configure for your OS and compile the source code.
gunzip -c iperf-<version>.tar.gz | tar -xvf - cd iperf-<version> ./configure make
To install iPerf, use 'make install', which will ask you where to install it. To recompile, the easiest way is to start over. Do 'make distclean' then './configure; make'. See the Makefile for more options.